Fibaro Walli Smart Dimmer - FGWDEU-111

FIBARO Walli Dimmer is a smart wall dimmer designed to control light source via Z-Wave network.

It measures active power and energy consumed by the controlled load.

You can install it with provided cover plate and switch button or other compatible.

• Can be used for dimming:
  • 110/230V operated conventional incandescent and halogen,
  • 12V operated ELV halogen lamps and dimmable LED bulbs (with electronic transformers),
  • 12V operated MLV halogen lamps (with ferromagnetic transformers),
  • dimmable LED bulbs,
  • dimmable compact fluorescent CFL tube lamps,
  • supported dimmable light sources (power factor > 0.5) with minimal power of 5VA using FIBARO Bypass 2.
• Can be used for switching:
  • compact fluorescent CFL tube lamps with electronic ballast,
  • fluorescent tube lamps with electronic ballast,
  • LED bulbs (power factor > 0.7),
  • supported light sources (power factor > 0.5) with minimal power of 5VA using FIBARO Bypass 2.
• Uses different operating modes:
  • „Trailing edge” for resistive loads (R)
  • „Trailing edge” for resistive-capacitive loads (RC)
  • „Leading edge” for resistive-inductive loads (RL)
• Can be used with FIBARO Walli covers or other compatible (see “Parts compatibility”):
  • GIRA – System 55 (Standard 55, E2, Event, Event Clear),
  • Legrand – Céliane,
  • Schneider – Odace.
• Active power and energy consumption metering.
• Can be installed in two and three-wired configuration.
• Calibrates automatically to the connected light source.
• Supports Z-Wave network Security Modes: S0 with AES-128 encryption and S2 Authenticated with PRNG-based encryption.
• Works as a Z-Wave signal repeater (all non-battery operated devices within the network will act as repeaters to increase reliability of the network).
• May be used with all devices certified with the Z-Wave Plus certificate and should be compatible with such devices produced by other manufacturers.

https://manuals.fibaro.com/walli-dimmer/